0
0

Pause Table Pre-Made Rubber Skins

Pause Table Pre-Made Rubber Skins

 

Yellow Blue Green Purple Red

SPECIAL ORDER ships separately
FREE USA shipping for this item
EXCLUDED from $120 free shipping offer
NOT eligible for discounts or coupon promotions
$169.99

Buying a kit with rubber granules, binder, etc. is the least expensive method of adding a rubber surface to your table or contacts, but it is a messy, stinky, and exacting process; if the temperature and humidity aren't just right, then the rubber doesn't cure correctly. So if you don't feel like making your own surface out of rubber granules, you can purchase Max 200 pre-made rubber surfaces, called rubber skins, that are ready to apply to your existing wood, aluminum, or fiberglass equipment.

This rubber surfacing conforms to AAC, AKC, ASCA, CPE, NADAC, UKI, and USDAA regulations. The rubber is very stable in all kinds of weather, and there is no shedding of granules. In fact, the granules are bound together so well that you can clean the surface by scrubbing it with a brush or power washing it.

Specifications

  • When you purchase a pre-made rubber surface for your table, you get a 36" x 36" skin. All you'll need to do is glue the surface to your table using contact cement (not included), and then trim the edges of the surface (if necessary) for a perfect fit to your table. Instructions are included.
  • The skin will add about 13 lbs. to your table.
  • Although other rubber colors are available, we recommend selecting yellow to avoid heat retention.

Note: These skins are made using only premium TPV rubber granules which are specifically designed for use as indoor and outdoor sports and play surfaces where safety, slip-resistance, flexibility underfoot, color-fastness, and UV-resiliency are critical. Not only does the color last for longer, but the granules do not harden over time because of the innovative technology used in the manufacturing process to ensure material stability. Plus they’re rigorously tested to meet internationally accepted standards. So don’t settle for EPDM alternatives or TPV imposters.

  Important Shipping Notes: Pause Table Rubber Skins are shipped directly from the manufacturer in New York via UPS. This item cannot be expedited or shipped by other carriers, and it cannot be shipped outside the U.S. Please allow 4 weeks for delivery.

To attach the skins to the obstacle you will need the following supplies:

  • 1 gallon DAP Weldwood contact cement
  • Stir stick
  • 6” foam roller
  • Xylene & paper towels for cleanup
  • Drop cloth
  • Saw horses
  • 2 clamps
  • Rolling pin
  • Box cutter with extra blades
  • Metal straight edge for a trim guide