Free Shipping on Orders over $50
Free Shipping on Orders over $50

Agility Dogs Get Over It Car Magnet

Agility Dogs Get Over It Car Magnet



This high-quality Agility Dogs Get Over It magnet will stay firmly in place on any steel surface, indoors or out. Vinyl surface with UV coating on a .25 mil thick magnetic stock makes this a durable magnet. Apply to a clean, dry surface. Size is 5-3/4"W x 5-3/4"H.

Do vehicles need special preparation before applying auto magnets?

Simple, both the vehicles surface and the black magnetic side of the sign should be clean and dry. The vehicle should be waxed prior to applying.

What is the best way to apply an auto magnet?

Let one edge of the magnet contact the vehicle in the desired position. Then let the magnetic power do the work as it puts the sign into place from the edge where you started to the edge of the opposite. If the magnet is not exactly where you want it, peel it off, reposition the starting edge and repeat. Make sure that the entire surface of magnet is smoothly against the vehicle with no air pockets underneath. In winter the temperature of the magnet should be about 50° during installation, but the temperature of the vehicle surface does not matter.

Do any auto surfaces present problems?

Care should be taken with wood grain paneling and metalllic finishes. Such surfaces should be checked weekly for the first 90 days of use. A generous waxing of both the surface where the magnet will be placed and the back of the magnet itself will help prevent damage.

What magnet maintenance is recommended?

Remove the magnet weekly and wipe dry both the magnetic side and the surface of the vehicle. During warmer humid weather it is recommended to remove the magnet every three to four days. This keeps moisture from collecting, which can potentially damage a vehicle's surface. Simply wash it with warm water and mild detergent. Remove magnet after snowfall and rain and then wipe dry.

Note: There is no warranty expressed or implied against loss of signs or damage to vehicle surfaces, as factory has no control over how the magnetic signs are cared for, altered, stored, and/or used, or the surface to which the signs are applied.

Customer Reviews

Be the first to write a review of this product.