Clip and Go Agility Jump Cup Strips - Clip-On, Purple
Do you struggle with bent, broken, or missing jump cups? Or do you want to build jumps but feel intimidated by the amount of work and expense of attaching individual jump cups? Whether you're making or repairing backyard or competition equipment, Clip and Go Clip-On Jump Cup Strips will solve your problems! Simply measure 27" from the ground and mark a line on each jump standard, then clip on a jump cup strip at each mark, and you're ready to go. It's that easy! Clip and Go Jump Cup Strips are designed to snap onto jumps made from Schedule 40 1" PVC pipe (outside diameter of 1.315") or 1-1/4" PVC pipe (outside diameter of 1.660").
Clip and Go Clip-On Jump Cup Strips are made of tough and flexible UV-stabilized polypropylene plastic. The sun won't hurt them and they'll stay flexible even at sub-zero temperatures. And, they are guaranteed not to break! In the rare event that your dog breaks a Clip and Go product, return it to the manufacturer and they'll replace it!
Even more importantly, Clip and Go Clip-On Jump cups are very safe. Take a hard look at some of the jumps we send our dogs over—saw-cut plastic, rusty bolts, and sharp metal edges are just some of the hazards—and imagine your dog crashing into the upright. Clip and Go Clip-On Jump Cup Strips have smooth edges and provide a high degree of flex so that if that crash happens, your canine teammate will be exposed to minimum risks.
To make changing jump heights easy, each strip has numbers molded into the plastic every 2", from 4" to 26".
Packaging: Clip and Go Jump Cup Strips come in a package of 2 for the price shown.
SHIPPING NOTE: This item must be shipped via UPS Ground service, which is only available in the continental US. This item cannot be sent to Alaska, Hawaii, APO, or FPO addresses, and it cannot be shipped to Canadian or overseas addresses.
Installing the Strips
- Measure 27" from the ground and mark a line on each 1" PVC or 1-1/4" PVC jump standard and then simply clip on a jump cup strip, lining up the top of the strip with the mark you made.
- If using with 1-1/4" PVC pipe (exterior diameter of 1 5/8"), then you'll need to attach the Clip and Go Clip-On Jump Cup Strips to the jump standards with the screws provided; these special screws will drill and tap the holes as you screw the strips on. All you need is a power screwdriver a a drill with screwdriver bits.
- Clip and Go Clip-On Jump Cup Strips also work with flat-surface jump standards made from metal or wood. Just trim off the clips on the back of the strip with a pair of wire cutters and then mount the strips with the screws provided.
Cutting the Strips
If you don't want certain heights on your jumps, you can easily cut off the cups you don't want using a pair of wire cutters or side cutters.