Our Padlock nose work hide really works!
This hide is 2" high from the bottom of the lock body to the top of the shackle and 1-3/4" at the widest point of the lock body. It holds multiple Q-tip halves.
The Padlock consists of three parts: body, top, and shackle. Please watch the video to see how it goes together and comes apart.
Note: Click the "How to Care" tab for important information on how to use and care for your 3D printed nose work vessel.
Our nose work vessels are made of PLA (Polylactic Acid) filament which is a recyclable, natural thermoplastic polyester derived from renewable resources such as corn starch or sugar cane.
Here are some important tips for use and care of our nose work vessels:
- You can leave Q-tips in the vessel for short periods, but don't store them in the vessel for long periods. Essential oils react to ALL surfaces they come in contact with which can cause training problems because the reaction changes how the odor smells. Periodically change your Q-tips and clean the vessel.
- The vessels are NOT dishwasher-safe. They should be hand-washed in warm water (if your hands are not comfortable in the water, it's too hot!) using liquid dish soap. Towel dry or air dry.
- You can also clean out your vessels by wiping the inside with 70% isopropyl alcohol (rubbing alcohol) or using Zero Odor Spray.
- Temperatures above 110°F can warp products made from PLA so do not leave the vessels in direct sunlight or a hot vehicle for long periods of time.
Recently Viewed Products
