Free Shipping on Orders over $120
Free Shipping on Orders over $120

Magnetic Teeter Treat Plate

Magnetic Teeter Treat Plate

 

What you receive

$44.99

Designed by Wade Robertson, this universal Teeter Treat Plate is a great accessory for helping teach your dog to go all the way to the end of the seesaw plank. It attaches to the plank with Rare Earth neodymium magnets, which are extremely strong. If you have a teeter with a steel frame, then the treat plate can be attached directly. If you have another type of seesaw, then you will need to use the provided screws to attach two washers (also provided) to the end of your board. The magnets on the treat plate will then attach to those. 

The Teeter Treat Plate stays in place on the front edge of the board even when the board drops and hits the ground. We recommend using doggie peanut butter or canned squeeze cheese because it stays in place on the treat plate when the board moves. It also acts as edible glue for attaching a piece of meat or other tasty treat to the plate. 

Just lift the treat plate away from the board to remove it and you have a regulation seesaw again!

The surface of the Teeter Treat Plate is 1 1/4" wide by 2 1/4" long. It's just under 1" tall.

Packaging: The treat plate comes with the magnets already attached to it as well as 2 screws and 2 countersunk washers to use on non-steel teeters.

Average Rating
4/5 with 1 review


NO DIRECTIONS
This is not as simple as represented - You can't just put it on the teeter - It came with no directions and I cannot separate the screws from the plate. UPDATE - I have since received instructions from Clean Run on how to use this product. All is well. But, I still say a diagram of how to separate screws & magnets would be most helpful.
Comment from Clean Run We're sorry that you are having difficulty. The basic instructions are on the website: If you have a teeter with a steel frame, then the treat plate can be attached directly to it -- no screws needed. If you have another type of seesaw, then you will need to use the provided screws to attach the two washers (also provided) to the end of your board. The magnets on the treat plate will then attach to those washers. We have a photo of that on the website. To separate the screws from the plate, just slide them away from each other. We ship them that way and let the magnets hold them in place so that the parts don't get lost in transit or when you open the package. Please contact us at info@cleanrun.com if you need additional help.
Was this review helpful to you?   Yes No