FREE shipping in the contiguous USA.
Triple jumps have been a challenge for years. They are expensive, hard to handle, and often heavy. Now there is an alternative. The Clip and Go Add-On AKC Triple Jump Kit is designed to be an affordable way to turn almost any PVC, wood, or metal jump you own into a competition-legal AKC triple jump.
With the kit, you receive two side panels. The side panels are the uprights for the front and middle bar of the triple you're building. Your existing single jump acts as the uprights for the back bar of the triple jump. Simply set the side panels behind your single jump; there are position tabs on each side panel that allow for quick and easy setup. Then, all you need to complete your AKC triple jump is three matching jump bars.
- Made from UV-stabilized polypropylene
- Works with most PVC, wood, and metal single jumps
- Clearly marked jump heights molded into the plastic
- Lightweight and easy to store
- Guaranteed not to break
Notes:
- Some assembly is required before you use the jump for the first time; the jump cups must be screwed into the side panels (screws and nuts are included) and the support foot inserted into each panel.
- Jump bars and single jump not included.
- The support feet on your single jump cannot be longer than 9.5" to use the kit.
Note: The Add-On Triple Jump is legal for AKC agility. The jump cups are in the proper position; however, you should be aware that the side panels are lower than most other triples so that it fits in a box that can be shipped via UPS. AKC rules only state how high the jump upright has to be, and that requirement is satisfied by the height of the jump you use with the Add-On Triple. We usually try to discourage clubs from buying this product specifically for hosting AKC trials because at 24", a large dog could slice the jump by cutting across and over the panels. The product was designed so that trainers could easily and relatively inexpensively have a triple jump to train with.