Clip and Go Agility Jump Wing Clips

Clip and Go Agility Jump Wing Clips

  Buy 12+, save $1 per package

In stock, ready to ship


Clip and Go Wing Clips provide an easy way to add wings to any PVC jump. Snap the Wing Clips to your wing panel and then snap to your jump standard, two clips on each wing. Use the screws provided to secure in place. Clip and Go Wing Clips hold the wings securely to the jump and even allow you to level each wing on uneven ground. In addition, your wings don't need "feet," so they can be easily stored when not in use.

Clip and Go Wing Clips fit either standard 1" or 1-1/4" PVC pipe (1" PVC has an outside diameter of 1-5/16" and 1-1/4" PVC has an outside diameter of 1-5/8"). 

Packaging: Clip and Go Jump Wing Clips come in a package of 4 (enough for one jump) for the price shown. Screws are included.

Customer Reviews

Average Rating
2/5 with 1 review

Doesn't stay together; clips too loose
Disappointed and Would not buy again. The clips it came with are actually a little too big for the clip-n-go jumps I have. Wings are loose and swing from side to side when I pick up the clip-n-go jumps w/wings attached. The little bars in the wings themselves also come loose and have to be put back in after moving the jump.
Comment from Clean Run There are variations in PVC pipe so they may fit some jumps more loosely than others. If you want to be able to lift the jump with the wings attached, we recommend inserting a screw through the hole that's pre-drilled in the clip to stop the wing from pivoting.
Was this review helpful to you?   Yes No

Recently Viewed Products